Table of Contents
Advertisement
3.
Remove the stop screw to detach the lock knob assembly, washer slock, and shoe shaft assembly.
Shoe shaft assembly
4.
Remove the four screws to detach the VF arm L.
5.
Remove the three screws to detach the hinge assembly.
Bosses
Rock ring
Hinge assembly
Note
• When installing the hinge assembly, fit the two bosses of the rock ring with the two holes of the hinge assembly.
• When installing the VF arm L, fit the two bosses of the VF arm L with the two holes of the hinge assembly.
6.
Install the removed parts by reversing the steps of removal.
PMW-300
Washer slock
Holes
P 2.6 x 4
Holes
P 2.6 x 4
Bosses
Lock knob assembly
Stop screw
VF arm L
P 2.6 x 4
P 2.6 x 4
2-18
Advertisement
Table of Contents
