DATALOGIC
TROUBLESHOOTING
PROBLEM
A beep or a LED blink signals an interruption of the radio communication with
the remote Bluetooth
SOLUTION
•
It is possible that the distance from the remote Bluetooth
than 10 m or that an obstacle interrupted the communication.
•
Restart the radio communication.
PROBLEM
The reader is Master and is not able to initialize radio communication with the
remote Bluetooth
SOLUTION
•
Put the reader near the remote Bluetooth
radio communication again.
•
Make sure that:
the remote Bluetooth
-
the remote Bluetooth
-
BT device with the same SPP.
•
Repeat the remote Bluetooth
PROBLEM
The remote Bluetooth
communication but is not able to communicate with it.
SOLUTION
•
Make sure that:
-
the remote Bluetooth
a password).
16
®
device.
®
device Slave.
®
device is powered;
®
®
device discovers a Lynx™ BT within its range of radio
®
®
device and try to initialize the
device is not already connected to another
®
device address procedure.
device has no communication protection (i.e.
®
device is more