Datalogic LYNX BT 432 Quick Reference Manual page 10

DATALOGIC
OPERATING WITH BLUETOOTH
The following procedures must be performed only if using the
Lynx™ BT reader with a BT device. If using the reader paired to
an OM-1000 BT cradle, you must follow the configuration
procedures as described in the cradle Quick Reference Guide.
NOTE
To start using your Lynx™ BT reading system you must:
1. Have a compatible remote Bluetooth
or an external Bluetooth
compatible device documentation.
2. Charge the Lynx™ BT battery using C-1000 charger as described in this
Quick Reference manual. A full charge takes up to 4 hours with Li-Ion
batteries.
3. Configure the reader as described in this Quick Reference manual under
"Lynx™ BT Configuration".
Lynx™ BT as Slave
A Lynx™ BT is Slave when it sends codes to a Master remote Bluetooth
device such as a PC, Laptop, PDA, etc, which has initialized the
communication.
Once set as Slave, a Lynx™ BT reader requires no particular configuration for
communication, however some radio parameters can be set to increase system
performance and data transmission security, see the Lynx™ BT Reference
Manual on the configuration CD-ROM. At startup the reader can only wait for
the Master to initialize the radio communication.
The following is a general procedure recommended for Lynx™ BT Slave
applications:
1. Power up the remote Bluetooth
2. Power up the Lynx™ BT reader within radio range (10 meters).
Any modifications to the radio configuration should be made at this time
before the radio connection takes place.
3. From the remote Bluetooth
procedure, (according to the procedure given in the documentation of
the Bluetooth
within radio range.
4. Check that "Datalogic BT Device s/n:
discovered devices.
5. Request to open an SPP connection with Lynx™ BT, making sure to
disable any required PIN and/or pairing parameters. Lynx™ BT is
discoverable and connectable without any required PIN (default).
6
®
adapter) ready to work. See your Bluetooth
®
®
Master device), to recognize the Lynx™ BT reader(s)
®
DEVICE
®
device (with built-in Bluetooth
®
Master device (e.g. Laptop or PC).
Master device, execute the Discovery
" is shown among the
®
radio
®
®