Lynx™ Bt Configuration - Datalogic LYNX BT 432 Quick Reference Manual

DATALOGIC
LYNX™ BT CONFIGURATION
The following procedures must be performed only if using the
Lynx™ BT reader with a BT device. If using the reader paired to an
OM-1000 BT cradle, you must follow the configuration procedures
described in the cradle Quick Reference Guide.
NOTE
Configure the Lynx™ BT by choosing one of the two procedures below and
reading the codes in the given sequence.
LYNX™ BT AS SLAVE
1.
2.
3.
YOUR READER IS NOW READY TO BE DISCOVERED (CONNECTED VIA
RADIO) BY A BLUETOOTH
THE DEFAULT VALUES.
8
Restore Lynx™ BT default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Set Lynx™ BT as Slave
AMHKHNFPFLHOENEIEPANHOGOCK
AFNFBEHCLGEOFMHMLJAKEDCGLK
APCHHJCJGIIJCMCFHPLGDGDBAK
AIFBJLBGMHPKMIDNJMGDLJNJKK
AAPHBAJICCFDDADLGCENADOFFK
AHKFBPKMFJGGMPIGLCBIOHLKJK
DDDDLDLDDDDLLLLDDLLDDLDLDL
Reset Lynx™ BT
AMHOHNBOHNGNENEIEPANHOGOCK
AHNFEBAMDKEOFMHMLJALFDAEJK
AKCBPJCJGIIJCMCEGJLDFBFHNK
AEFBJLBGMHPKMIAKOABAINNHGK
AAPHBAJJDGDPCKHHIKBJCAIBHK
AELFAMPFKHDKGIFAHAIKMECLKK
DDLLLLLLLDLLLLLDLDDDDLDLLL
®
MASTER DEVICE AND READ CODES USING