Datalogic LYNX BT 432 Quick Reference Manual page 9

STATUS INDICATORS
Lynx™ BT Series Reader LED Functioning
LED
Red at Power On, blinks briefly, then a beep occurs. Then, it turns off;
lights when a wrong read occurs;
lights briefly when the aiming system is enabled;
Green lights when a code has been read and decoded;
blinks during binding with OM-1000 BT (see OM-1000 BT Quick
Reference Guide for details);
single blink every 2 seconds when BT connection is active;
double blink every 2 seconds when BT connection is not active.
Lynx™ BT Series Reader Beeper Functioning
Beeper Behavior
4 ascending tones
4 descending tones
2 beeps
1 beep
Behavior
during radio connection initialization.
upon radio disconnection.
upon good read of a code, when paired to OM-1000
BT cradle.
upon good read of a code, when communicating with
a BT device.
Condition
LYNX™ BT
5