Datalogic LYNX BT 432 Quick Reference Manual page 16

DATALOGIC
ADVANCED FORMATTING PARAMETERS
format disabled
RADIO PARAMETERS – Lynx™ BT with BT Device
Ack/Nack protocol with BT device = none, auto-connection (for Master only)
enabled, auto reconnection (for Master only) enabled, RX timeout with BT
Device = 10 sec, user-friendly name = Datalogic BT Device s/n: xxxxxxxxxx
(where x = Lynx™ BT serial number), authentication & encryption with BT
device disabled.
RADIO PARAMETERS – Lynx™ BT with OM-1000 BT
Radio protocol timeout = 3 sec, beeper control for radio response = good
decode & good reception, transmission mode = one way, authentication &
encryption with cradle disabled, batch mode enabled.
12