Table of Contents
Advertisement
Charge completed
The batteries must be charged at a temperature ranging from 0°
to 45 °C (+32° to +113 °F).
NOTE
For further details about LED functioning refer to the C-1000 and OM-1000 BT
Quick Reference Guide.
CHANGING THE BATTERIES
To change the batteries of your reader, unscrew the
battery cover screw, replace the old battery pack with a
new one of the same type, then insert the cover onto the
handle and screw it back into place. (See the following
figures).
To turn on the reader, press the trigger.
WARNING
Charging
Power on
Do not incinerate, disassemble, short terminals or
expose to high temperature. Risk of fire, explosion. Use
specified charger only. Risk of explosion if the battery is
replaced by an incorrect type. Dispose of the batteries
as required by the relevant laws in force.
Battery Cover Screw
LYNX™ BT
3
Hide quick links:
Advertisement
Table of Contents
