NEC Express5800/E120g-M Maintenance Manual page 29

Chapter 1 Maintenance
 Have you created a logical drive?
→
For a RAID system, create a logical drive using EXPRESSBUILDER or RAID Configration Utility (LSI
Software RAID Configraition Utility or Off-line Utility) to install OS.
[?] Unable to install Windows
 Have you checked precautions for installation?
→
For installing OS, see Installation Guide (Windows).
[?] A product key is not requested
 Is the OS installation disc the Backup DVD-ROM (Windows Server 2008 R2)?
→
You do not need to type the product key when installing Windows Server 2008 R2 with the Backup
DVD-ROM.
[?] The following devices are indicated as faulty devices in Server Core installation of Windows
• SM Bus Controller
• PCI Simple Communications Controller
•
Base System Device
•
System Interrupt Controller
•
Performance Counters
•
PCI Device
→ There is no problem with this server.
[?] Unable to access the partition which was previously created after reinstalling with plural disks
→
For details, refer to the website below:
http://support.microsoft.com/kb/2497048/ja
[?] When installing Windows Server 2008 R2 with plural disks, the system partition and the boot partition (100
MB) are created in another disk
→
For details, refer to the website below:
http://support.microsoft.com/kb/2530901/ja
[?] When Starter Pack is installed on Windows Server 2008 R2, the following message is displayed for a
moment upon shutdown
1 program still needs to close:
(Waiting for) Task Host Window
→
Ignore the message.
For details, refer to the website below:
http://support.microsoft.com/kb/975777/en-us
(Japanese text)
(Japanese text)
Express5800/E120g-M Maintenance Guide
5. Troubleshooting
29