Table of Contents
Advertisement
Chapter 2 Useful Features
(2)
Memory Configuration submenu
From the Advanced menu, select Memory Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
to show its submenus.
For details about the options, see the table below.
Memory Information
Hardware Memory Test
Memory Retest
Memory Frequency Limit
NUMA
Cluster On Die
Snoop Mode
Patrol Scrub
Demand Scrub
62
on the left, move the cursor to it and then press the <Enter> key
Option
[Disabled]
Enabled
[No]
Yes
[Auto]
1333 MHz
1600 MHz
1866 MHz
2133 MHz
2400 MHz
Disabled
[Enabled]
[Disabled]
Enabled
Home Snoop
[Early Snoop]
Home Snoop with
Directory
Disabled
[Enabled]
Disabled
[Enabled]
Express5800/E120g-M Maintenance Guide
Parameter
−
Enable or disable to execute memory test
during POST.
If a memory error is detected while this option
is set to Enabled, the relevant memory
resource is degraded.
When this option is set to Yes, error
information on memory is cleared, and all
DIMMs are reconfigured at the next startup.
No is automatically selected after DIMMs are
reconfigured.
Specify the upper limit of operating frequency
of memory. The operating frequency may be
lowered than the specified value depending on
memory configuration.
Enable or disable Non-Uniform Memory
Access feature. This option is displayed only
in multi-processor configuration..
Enables or disables Cluster On Die feature.
This option is accessible when the installed
processor supports this feature and Enabled
is specified for NUMA.
This option must be disabled on VMware ESXi
5.x.
Specify Snoop mode. This option is accessible
when Disabled is specified for Cluster on
Die.
Enable or disable memory RAS feature (Patrol
Scrubbing).
Enable or disable memory RAS feature
(Demand Scrubbing).
1. System BIOS
Descriptions
−
[
]: Factory setting
Advertisement
Table of Contents
