Table of Contents
Advertisement
Chapter 2 Useful Features
5） Select Add More Spans to create Span2.
6） Select Select Drives under Span2, and then select the device type for Select Media Type.
7） When the selected physical device is displayed, select two physical devices to be created,
8） Select all of the physical devices to be created, select Apply Changes, and then select OK
130
and then select "Enabled".
on the next screen.
•
Note
You may select either of the upper or lower Apply Changes which is provided at two
locations.
•
Do not create Span3 and more in Add More Spans menu.
Express5800/E120g-M Maintenance Guide
5. RAID System Configuration
Advertisement
Table of Contents
