Led Test - JUMO mTRON T Operating Manual
Measuring, control, and automation system analog output module 4-channel
Hide thumbs
Also See for mTRON T:
- Operating manual (278 pages) ,
- Manual (114 pages) ,
- System description (74 pages)
Table of Contents
Advertisement
7.1.2
LED test
Setup dialog
Parameters
Parameters
P LED
S LED
NOTE!
An LED maintains the set status until a new status is set or until the "LED test" dialog window
is closed.
Selection/settings
This LED cannot be set manually.
To test the LED, click the required status
to select it (OFF, red, or green).
After selection, the LED enters the cho-
sen status immediately.
7 Online parameters
Description
The "P" LED (Power) is permanently lit
in green if the module is being supplied
with voltage.
This function is used to test the electrical
function of the "S" LED (Status).
41
Advertisement
Table of Contents
