Description; Brief Description; Block Diagram - JUMO mTRON T Operating Manual

2.1

Brief description

The analog output module 4-channel is equipped with four outputs. The output signal,
0(2) to 10 V or 0(4) to 20 mA, can be configured individually for each channel.
The analog outputs are controlled via the system bus.
LEDs are used to indicate applied voltage supply and the module operating status.
For retrofitting or service work, the module insert can be easily pulled out of the case to the
front. The case, including the bus PCB, remains installed on the DIN rail.
The user can use a setup program or the multifunction panel 840 for straight-forward configu-
ration of the analog output module 4-channel.
2.2

Block diagram

Voltage supply

2 Description

4 analog outputs
0(2) to 10 V or 0(4) to 20 mA
System bus
15