Online Parameters; Calibrate / Test; Analog Output - JUMO mTRON T Operating Manual

Measuring, control, and automation system analog output module 4-channel

Hide thumbs Also See for mTRON T:

Table of Contents

NOTE!

An active connection between the setup program and the central processing unit is required

to configure the parameters described in this section.

7.1

CAUTION!

Incorrect settings may result in inadmissible changes to values or statuses.

This can have negative effects on the system function.

Individual functions must be changed only by (or under the instruction of) a service technician

of the device manufacturer.

7.1.1

Setup dialog

Parameters

Analog output

Signal

Setpoint value

Testing

Selection/settings

Select output (drop-down list).

Select signal type (drop-down list).

0 to 100

Click the "Test" button.

7 Online parameters

Description

Output on which the calibration or test is

to be performed.

Signal type that is issued at the relevant

output.

Value to be issued.

An additional window opens with

instructions for testing (see below).

Table of Contents