NOTE!
Modules with a recent production date have two fixing knobs on the right side of the case and
on the left two round holes (for greater torsional strength of the entire module assembly). If a
module with fixing knobs is to be inserted into an existing module assembly and the adjacent
module does not have the corresponding holes, the fixing knobs must be completely re-
moved to ensure electrical contact between the modules. For example, a cutter knife and a
file can be used for removal.
3.2.1
Input/output modules
In a sequence at the user's discretion, input/output modules can be arranged to the right next
to a base unit or a router module.
Installation, using the example of a multichannel controller module 705010
Example installation
(A)
(A2)
(A)
(A3)
(B4)
3 Mounting
(A1)
(B)
(C)
(D)
(C5)
(D6)
(D7)
19