JUMO mTRON T Operating Manual page 20

Measuring, control, and automation system analog output module 4-channel

Hide thumbs Also See for mTRON T:

Table of Contents

3 Mounting

Procedure:

Step

Dismounting, using the example of a multichannel controller module 705010

Activity

Mount the multichannel controller module (A) in the DIN rail from above (A1).

Pivot the multichannel controller module (A) downward until it snaps into place (A2).

Move the multichannel controller module (A) to the left against the previous module (A3)

until the plug connections for the voltage supply and the system bus are connected.

Position additional modules (B) and move to the left against the previous module (B4).

After the final module, position the cover (C) on the DIN rail and move to the left against the

module (C5).

After attaching the cover, position the end bracket (D) on the DIN rail and move to the left

against the cover (D6).

Fasten the end bracket (D) using a screwdriver (D7). For this purpose, ensure that the end

bracket and the cover are positioned flush against the final module.

(A)

(B)

(A4)

(B3)

(C2)

(D1)

Table of Contents