Introduction; Purpose Of The Manual; Additional Resources; Document And Software Version - Danfoss VLT 2800 Quick Manual

Introduction

1 Introduction

1.1 Purpose of the Manual

The Quick Guide provides basic information for safe instal-
lation and commissioning of the frequency converter.
The Quick Guide is intended for use by qualified personnel.
Read and follow the Quick Guide to use the frequency
converter safely and professionally, and pay particular
attention to the safety instructions and general warnings.
Keep the Quick Guide available with the frequency
converter.
Illustration 1.1 Installation Example
For further examples of installation and detailed
descriptions on functions, refer to the VLT
Guide.
®
VLT is a registered trademark.
MG28M202
Quick Guide

1.2 Additional Resources

The Quick Guide provides the basic information for
installing and commissioning the frequency converter.
Other resources are available to understand advanced
frequency converter functions and programming:
•
•
•
•
•
•
•
•
•
•
•
•
•

1.3 Document and Software Version

Edition
MG28M2

1.4 Approvals and Certifications

® The frequency converter complies with UL508C thermal
2800 Design
memory retention requirements. For more information,
refer to the section Motor Thermal Protection in the Design
Guide.

1.5 Disposal

Danfoss A/S © Rev. 2014-03-18 All rights reserved.
VLT 2800 Design Guide
VLT 2800 Filter Instruction
Brake Resistor Manual
Profibus DP V1 Manual
Profibus DP Manual
VLT 2800 DeviceNet Manual
Metasys N2 Manual
Modbus RTU Manual
Precise Stop
Wobble Function
VLT 2800 NEMA 1 Terminal Covering
VLT 2800 LCP Remote-mounting Kit
Protection against Electrical Hazards
Remarks Software version
Replaces MG28M1 3.2X
Do not dispose of equipment containing
electrical components together with
domestic waste.
Collect it separately in accordance with
local and currently valid legislation.
1 1
3