Configuring The Cisco Ata Using A Tftp Server; Setting Up The Tftp Server With Cisco Ata Software; Configurable Features And Related Parameters - Cisco ATA-186 Administrator's Manual

Chapter 3 Configuring the Cisco ATA for SIP

Configuring the Cisco ATA Using a TFTP Server

The TFTP method of configuration is useful when you have many Cisco ATA because you can use a
TFTP server for remote, batch configuration of Cisco ATAs. A TFTP server can host one unique
configuration file for each Cisco ATA.
This section contains the following topics:
•
•
•
•
•

Setting Up the TFTP Server with Cisco ATA Software

This section provides the procedure for the Cisco ATA administrator to obtain the correct Cisco ATA
software and set up the TFTP server with this software.
Procedure
If you are a registered CCO user. go to the following URL:
Step 1
http://www.cisco.com/cgi-bin/tablebuild.pl/ata186
Download the zip file that contains the software for the applicable release and signaling image you are
Step 2
using. The contents of each file are described next to the file name. Save the zip file onto a floppy disc.
Note
Step 3 Extract the signaling files onto the TFTP server. This should be the same TFTP server that will contain
the binary Cisco ATA configuration file that you create (either ata<macaddress> or atadefault.cfg).

Configurable Features and Related Parameters

Table 4-1 on page 4-2
configured for the Cisco ATA to work.
For descriptions of important Cisco ATA SIP services that you can configure, and references to their
configuration parameters, see the
"Additional SIP Services" section on page
Table 4-3 on page 4-12
Cisco ATA.
configure each of these features. Each link takes you to a detailed description of the parameter that
includes its default values.
OL-3410-01
Setting Up the TFTP Server with Cisco ATA Software, page 3-7
Configurable Features and Related Parameters, page 3-7
Creating Unique and Common Cisco ATA Configuration Files, page 3-8
atadefault.cfg Configuration File, page 3-12
Configuring the Cisco ATA to Obtain its Configuration File from the TFTP Server, page 3-13
The file that contains the protocol signaling image has an extension of .zup.
contains a list of all required SIP parameters. These parameters must be properly
lists, in alphabetical order, various features that you can configure for the
Table 4-3 on page 4-12
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
"Important Basic SIP Services" section on page 4-1
4-3.
also includes links to the related parameter that allows you to
Configuring the Cisco ATA Using a TFTP Server
and the
3-7