Electrical Connection; Connecting Cable - Accessory Ha0108Xx; Setup And Adjustment; Dew Point Adjustment By The User - E+E Elektronik EE355 Manual

4

Electrical Connection

The electrical connection is made via the 5-pin connector M12x1. An attachable mating connector
is included.
4 3
5
1 2
To meet the EMC Directive 2004/108/EC a shielded cable must be used.
4.1

Connecting cable - Accessory HA0108xx

5

Setup and Adjustment

The EE355 is ready to use and requires no configuration by the customer. The factory setting of
the analog output corresponds to the ordered type designation.
With an optional Modbus to USB converter (order code HA011013) and the free EE-PCS config-
uration software the user can adjust the transmitter, set the Modbus parameters, and change the
scaling of the analog output.
5.1

Dew point adjustment by the user

Dew point adjustment by the user is possible only at low dew points. The adjustment can only be
carried out if the difference from ambient temperature to the reference dew point temperature is
<-60 °C.
Example:
Ambient temperature = 20 °C
Reference dew point temperature must be lower then -40°C.
10
18...28V DC
1
Output 4-20 mA
2
mA
3
4
5
1
2
3
4
5
+
-
RS485 A (=D+)
RS485 B (=D-)
BN V+
WH Output 4-20mA
BU GND
BK RS485 A (=D+)
GY RS485 B (=D-)
Manual EE355 Dew point transmitter