Door Spring - Bosch SRS4002GB Repair Instruction

4.14

Door spring

The door spring compensates for the weight of the furniture front.
The door springs are situated on the right and left under the base pan.
The tensile force is transferred to the door hinge with a tension cord
via a deflection roller. The clamping force of the spring can be
increased with the enclosed adjusting screw (built-in appliances only)
via the deflection roller.
A = Adjusting screw
B = Spring tensioner (deflection roller)
C = Tension cord
58300000002393_ara_en_a.doc – 31.07.07
If the furniture doors are very heavy (e.g.: marble), the tensile force of
the standard installed springs and maximum pretension of the spring
tensioner is no longer adequate.
In this case stronger door springs (see table) may be used.
If furniture doors are very light, the door springs can also be replaced
by lighter ones.
The door springs must be replaced in pairs only !
The maximum weight of the furniture door is approx. 8 kg.
Spring force Coloured dot
max. light pink
blue-purple
yellow-green
min.
beige
Note:
The door springs can be identified by a coloured dot on the rear of the
appliance.
Max. weight
Material no.:
of furniture
d
174745 approx. 8 kg
174631
174500
174467 1 kg
Seite 32 von 60