Bosch SRS4002GB Repair Instruction page 38

4.19.1 Filling procedure for appliances without a heat exchanger
When the static level has been reached, the module is actuated by the
level switch, moves to the next position and the circulation pump is
switched on. When the circulation pump starts up, the level pressure
switch switches back. Filling continues dynamically until the level
switch is re-actuated, the rinsing level has then been reached.
Fill to static level Fill to dynamic level
Level switch F1
Filler valve
Circulation pump
58300000002393_ara_en_a.doc – 31.07.07 Seite 38 von 60