Dispenser - Bosch SRS4002GB Repair Instruction

4.9

Dispenser

The release mechanism is actuated via an actuator. When the
actuator is actuated for the first time, the detergent-dispenser cover is
opened. At the same time the release pawl engages with the
switching core of the rinse-aid lever so that when the actuator is
actuated again, the dosing plunger is lifted off the rinse aid.
Technical specifications:
Rinse-aid filling quantity
Setting 1–6
Detergent capacity max.
See Actuator for additional technical specifications.
Removal:
Unscrew the outer door. Disconnect the power. Using a screwdriver,
lift the retention plates stamped out of the inner door off the catch
tappets.
Note:
Leave the upper basket in the appliance in order to
remove the dispenser; close the door and then press in
the unlocked dispenser.
Wear protective
Adjust the retention plates to the middle before installing the dispenser
to ensure that all the catch tappets lock securely.
Before installing the seal, lubricate with washing-up liquid.
58300000002393_ara_en_a.doc – 31.07.07
120 ml
per 1 ml
45 g
gloves; risk of cuts.
A = Dosing plunger D = Magnetic float
B = Switching core E = Reed contact (optional)
C = Actuator F = Optical sensor (optional)
Seite 27 von 60