Table of Contents
Advertisement
NL Cleaning and maintenance
If the "LED A" → Page 15 does
not light up, Extra Dry is switched
off.
If the "LED A" → Page 15 lights up,
Extra Dry is switched on.
To save the settings, press for
5.
approx. 3 seconds.
Set signal volume
on
to press.
1.
To access the device settings,
2.
press . for 3 seconds
to press.
a flashes in the display.
Run up to the
3.
display as many
times.
Just as often on
4.
the desired signal volume is set.
Depending on the burning mode
0, 1, 2 or 3 LEDs. The set acoustic
signal can be heard.
The factory setting is position 2
("LED A and LED B" → page 15).
To save the settings, press for
5.
approx. 3 seconds.
Factory reset
on
to press.
1.
To access the device settings,
2.
press . for 3 seconds
to press.
a flashes in the display.
Just as many times
3.
until pears on the
display.
on
Press to reset the device
4.
to factory settings.
a The device is reset.
34
to press
and clipping
press to
to press
,
and cut-
R
cleaning and maintenance
Carefully clean and maintain your
appliance to ensure that it continues to
work properly for a long time.
Cleaning the rinse aid container
WARNING
Risk of health hazard!
The use of chlorinated cleaning
agents can lead to health damage.
Never use chlorinated cleaning agents
▶
using resources.
Remove coarse soiling in the
1.
interior with a damp cloth.
Pour detergent into the detergent
2.
dispenser.
Select the program with the
3.
highest temperature.
→ "Programs", Page 17
Start the program without
4. "
dishes." → Page 31
Detergent
Only use suitable cleaning agents to
clean the appliance.
→ "Safe use", Page 10
Device maintenance tips
Observe the appliance maintenance
tips in order to maintain the function
of the appliance for a long time.
Measure
The door seals keep the front and
operating parts clean and hygienic.
dishwasher regular
Benefit
Advertisement
Table of Contents
