Table of Contents
Advertisement
If a burner does not light
Turn the control dial to O (Off) and wait at least one minute before trying again, to all
the gas to disperse.
If the burner still does not light, check that:
the cooker is plugged in and the power supply is switched on
●
there is no power failure in your home or neighborhood
●
the gas is turned on
●
the gas bottle is not empty (if you use bottled gas)
●
the ignitors are sparking. If they are not sparking, they may be dirty or wet. Clean them
●
with a toothbrush and methylated spirits, as shown below. See 'Care and cleaning' for
instructions on removing and replacing the burner parts.
Flame failure probe
If the flame is irregular
Check that the burner parts (flame spreader and burner cap) are:
clean and dry
●
positioned correctly, as shown below.
●
For further advice, see sections 'Care and cleaning' and 'Troubleshooting'.
●
Ignitor
Burner parts
30
USING YOUR GAS COOKTOP
Burner cap
Flame spreader
Ignitor
Correct assembly
of burner parts
Cleaning the probe and ignitor
Incorrect assembly of
burner parts, resulting in
irregular flames
Hide quick links:
Advertisement
Table of Contents
