Filter Programming - Pentair FLECK 5800 SXT Installer Manual

Installer Manual Fleck 5800 - SXT - Programming
6.5.19.1 Relay volume interval (VO)
Set the relay volume interval.
Note
This option is available only if VR is set to Fb.
Note
The relay volume interval can be set from 1 to the total capacity in litres.
BD Press or
BE Press to validate the selection and move to the next parameter.
6.5.19.2 Relay time ON (TO)
Set the relay time ON.
Note
This option is available only if VR is set to Fb.
Note
The relay time ON can be set from 1 to 7200 minutes.
BF Press or
BG Press to validate the selection and move to the next parameter.
6.6.

Filter programming

To use the valve as a filter, in the master programming mode, set the regeneration mode (RF) to filter
(FLtr). The controller will let set only the steps necessary to the filter mode, which are: regeneration
control type (CT), days override (DO), regeneration time (RT), backwash (BW), rapid rinse (RR), day of
week (Dn) and current day (CD).
60 / 92
to set the relay volume interval.
to set the relay time ON.
Ref. MKT-IM-004 / A - 18.04.2017