Advertisement
FILTER APPLICATION – GENERAL INFORMATION
This filter is designed for use in domestic/residential swimming pool installations with correctly
sanitised fresh or salt chlorinated water. Suitable for use with sand, Zelbrite or glass filter
media.
1. Locate the filter system as close to the pool as practical.
2. Place the filter on a level stable foundation, preferably a concrete pad or paving. Filter
systems loaded with sand and water can exceed 500kg.
3. Position all equipment to provide ease of access for future servicing.
4. Protect the filter and pump from weather and direct sunlight by ensuring that they are
properly housed.
5. Ensure there is sufficient space to provide adequate ventilation to electric pump motor.
6. Clean a new pool as well as possible before filling pool and operating filter. Excess dirt and
large particles of foreign matter in the system can cause serious damage to the filter and
pump.
7. Ensure pump is compatible with filter specifications.
8. For below water level installations ensure isolation valves are installed to reduce risk of
flooding.
Media Filter Owner's Manual
4
Advertisement
