Resetting The Controller; Soft Reset (Sr); Hard Reset (Hr) - Pentair FLECK 5800 SXT Installer Manual

6.8.

Resetting the controller

Note
There are two methods to reset.

6.8.1. Soft reset (SR)

Caution
All the parameters are set to default values, except volume remaining in volumetric
systems and days since last regeneration in time clock systems.
A Press and hold
until SR is displayed.

6.8.2. Hard reset (HR)

Caution
All the parameters are set to default values.
A Hold while powering up the unit.
B The display shows HR.
C Reprogram all parameters in Master programming mode.
Ref. MKT-IM-004 / A - 18.04.2017
and for 25 seconds while in normal service mode
Installer Manual Fleck 5800 - SXT - Programming
63 / 92