Red Laser Pointer - Leica MS50 User Manual

1.6.4
General
CAUTION
CAUTION
MS50/TS50/TM50, Safety Directions

Red Laser Pointer

The laser pointer built into the product produces a visible red laser beam which
emerges from the telescope objective.
The laser product described in this section is classified as laser class 3R in accordance
with:
• IEC 60825-1 (2014-05): "Safety of laser products"
Direct intrabeam viewing may be hazardous (low eye hazard level), in particular for
deliberate ocular exposure. The beam may cause dazzle, flash-blindness and after-
images, particularly under low ambient light conditions. The risk of injury for laser
class 3R products is limited because of:
a) unintentional exposure would rarely reflect worst case conditions of (e.g.) beam
alignment with the pupil, worst case accommodation,
b) inherent safety margin in the maximum permissible exposure to laser radiation
(MPE)
c) natural aversion behaviour for exposure to bright light for the case of visible
radiation.
Description
Wavelength
Maximum average radiant power
Pulse duration
Pulse repetition frequency (PRF)
Beam divergance
NOHD (Nominal Ocular Hazard
Distance) @ 0.25s
From a safety perspective, class 3R laser products should be treated as potentially
hazardous.
Precautions:
1) Prevent direct eye exposure to the beam.
2) Do not direct the beam at other people.
Potential hazards are not only related to direct beams but also to reflected beams
aimed at reflecting surfaces such as prisms, windows, mirrors, metallic surfaces, etc.
Precautions:
1) Do not aim at areas that are essentially reflective, such as a mirror, or which could
emit unwanted reflections.
2) Do not look through or beside the optical sight at prisms or reflecting objects when
the laser is switched on, in laser pointer or distance measurement mode. Aiming at
prisms is only permitted when looking through the telescope.
Value
TS50/TM50
658 nm
4.8 mW
800 ps
100 MHz
0.2 mrad x 0.3 mrad
44 m
MS50
1.7 mW
1.5 ns
2 MHz
21 m
13