Seagull Models Sparrow Hawk SEA-93 Instruction Manual page 20

SPARROW HAWK
M3x25 mm.
M3x30 mm.
INSTALLING THE BATTERY-RECEIVER.
1) Plug the six servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
20
Rudder.
22mm.
M3x10 mm.
M3 x 10mm.
Instruction Manual
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
Receiver.
Antenna.
INSTALLATION PILOT.
M3 x 6mm.
Battery.