Regular Adjustment Flow (High Accuracy); Adjustment Timing; Adjustment Order - Konica Minolta AccurioPress C2070 Daily Maintenance Manual

3.3

Regular adjustment flow (High accuracy)

3.3 Regular adjustment flow (High accuracy)
3.3.1

Adjustment Timing

- Immediately before the job for which hue is important is output
- When the color stability is not desirable (you want to increase the accuracy of reproducibility)
- When the paper type is different
3.3.2

Adjustment Order

- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is not mounted
Ad- Adjustment item
just-
ment
order
1 [Gamma Automatic Adjustment]
2-a [Maximum Density Adjustment] (for i1Pro/i1Pro2)
2-b [Maximum Density Adjustment] (for FD-5BT)
3 Controller Calibration
- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is mounted
Ad- Adjustment item
just-
ment
order
1 Color Density Control setting check
2 [Gamma Automatic Adjustment]
3-a [Max. Density Auto Adj.]
3-b [Maximum Density Adjustment]
4 [Color density manual control]
Tips
-
If you use [Package Color Auto Adj.], this machine automatically makes the adjustments in step 2 below
and after. To use [Package Color Auto Adj.], mount Intelligent Quality Optimizer IQ-501 on the ma-
chine. For details, refer to page 3-103.
-
For "Color Density Control setting check", check that [Default] or [Registered Adj. Data] is also selected
for the tray in [Paper Setting] - [Color Density Control].
-
To use general paper, select [Default Adj. Data]. To use special paper or increase the accuracy of the
automatic adjustment, [Each Paper Type Color Adj.] is recommended.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
3
Reference
page 3-9
page 3-50
page 3-59
page 3-76
Reference
page 3-70
page 3-9
page 3-67
page 3-49
page 3-73
3-4