Konica Minolta AccurioPress C2070 Daily Maintenance Manual page 143

3.6 Details of quality adjustment items
5
Check that each item is set as shown below.
Item
[Use Color Density Control]
[Periodical Adj. Execution]
[Adjustment Execution Timing]
[Chart Tray Setting]
% To periodically perform density adjustment using Relay Unit RU-509/Relay Unit RU-518 or Intel-
ligent Quality Optimizer IQ-501, set the [Periodical Adj. Execution] to [ON].
6
Press [Next].
7
When Intelligent Quality Optimizer IQ-501 is not mounted on the machine, check that [Switch
Color(1st or 2nd)] is set as shown below as necessary.
% To prioritize the image quality: [Precise]
This function adjusts both the primary colors (CMYK) and secondary colors (RGB).
% To reduce the paper consumption for color density control: [Standard]
This function only adjusts the primary colors (CMYK).
When Intelligent Quality Optimizer IQ-501 is mounted on the machine, [Precise] is always set.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
Description
[ON]
[ON]
[Before Job Start] (Available when you
want to prioritize the hue standardiza-
tion in a single job)
[During Job Runs] (Available when you
want to prioritize the hue standardiza-
tion among multiple jobs)
[OFF]
3
3-72