Konica Minolta AccurioPress C2070 Daily Maintenance Manual page 88

3.6 Details of quality adjustment items
16
When the following screen is displayed, place the spectrophotometer on the patch at the top in the up-
per left, and press the button for the spectrophotometer. The scanned patch is displayed on the screen,
and the scan range frame moves to the next scan position.
17
Continuously, place the spectrophotometer on the next right patch, and press the button for the spec-
trophotometer. Measure all the patches in the same operation.
% If you place the spectrophotometer on the wrong place (patch), click the
the previous patch position.
% The white portion where it is displayed that nothing is printed is also part of the patch. Do not forget
to measure it. If not measured, an error will occur.
18
When you are finished with the chart measurement, click [Close].
% Continuously, go to "Saving the measured data of the density balance" (page 3-19), and save the
measurement data.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
3
button to go back to
3-17