Konica Minolta AccurioPress C2070 Daily Maintenance Manual page 46

2.5 How to Operate the Both Sides Adj. Item
% Set the black side of the background sheet face down (facing to the original glass), and fit it to the
vertical size guide and horizontal size guide as shown below. In doing so, be careful not to shift
the position of the adjustment chart that has previously been set.
% Close the ADF.
13
Scan the adjustment chart.
Press [Start] on the [Scan Adjustment Chart] screen.
When scanning is properly completed, the counter of [Number of Scanning] on the [Scan Adjustment
Chart] screen is added by one, and the blue frame displayed in the illustration on the screen shifts to
the next one on the right side. If you move the adjustment chart before the blue frame shifts to the next,
the measurement may not be performed properly.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
2
2-25