Konica Minolta AccurioPress C2070 Daily Maintenance Manual page 34

2.5 How to Operate the Both Sides Adj. Item
10
Press [Exit PrintMode].
11
Check the lengths at points [2], [4], [6], and [8] on the second and third output charts.
Be sure to make note of the measurement lengths.
When the lengths at points [2], [4], [6], and [8] are within the respective ranges shown below, press
[Close], then press [OK] to finish the adjustment.
When the lengths at points [2], [4], [6], and [8] are outside the respective ranges shown below, also
measure the lengths at points [1], [3], [5], and [7], then proceed to step 12.
[2]: 200 mm ^ 0.3 mm
[4]: 200 mm ^ 0.3 mm
[6]: 200 mm ^ 0.3 mm
[8]: 200 mm ^ 0.3 mm
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
2
2-13