Konica Minolta AccurioPress C2070 Daily Maintenance Manual page 84

3.6 Details of quality adjustment items
4
Select the chart to be output according to the spectrophotometer to be used.
After the selection, press [Print Mode].
The recommended charts are as follows.
- [Type1] of [<Measure Spectrophotometer-1 (i1-iSisXL)>]
- [Type2] of [<Measure Spectrophotometer-2 (i1-Pro/i1-Pro2)>]
Item
[<Measure Spectropho-
tometer-1 (i1-iSisXL)>]
[<Measure Spectropho-
tometer-2 (i1-Pro/i1-
Pro2)>]
5
Set the paper on the [PRINT MODE] screen and press Start on the control panel.
The color chart is output for measurement using the spectrophotometer.
6
On the computer where the X-rite Measure tool has been installed, select [Start] - [All Programs] - [X-
Rite] - [ProfileMaker Pro 5.0.10] - [MeasureTool].
X-rite Measure tool starts.
% The following description uses screen examples in English. To display menus and messages in Eng-
lish, select [Language] - [English] on the Measure Tool toolbar, and then restart the X-rite Measure
tool.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
[Type1]
[Type2]
[Type1]
[Type2]
Description
Simple checking chart for 8-step gradation
(Recommended)
Detailed checking chart for 16-step gradation
Simple checking chart for 1-step gradation
Detailed checking chart for 3-step gradation
(Recommended)
3
3-13