Command And Response Table For Sis Commands - Extron electronics DXP 44 HD 4K PLUS Setup Manual

DXP HD 4K PLUS Series • Setup Guide (Continued)

Command and Response Table for SIS Commands

Command Function
Output Switching (Ties)
NOTES:
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!,02*02&, or 003*003%).
Tie HDMI input to HDMI video and
audio outputs.
Example
Tie input to output, HDMI video only
Example
X$
Tie input to output de-embedded
audio
Example
Tie multiple inputs to multiple outputs,
audio and video
Mutes
Set HDMI video mute
NOTE:
This command mutes both the HDMI video and the embedded audio.
Audio mute and unmute
View audio mute status
NOTE: X#
To set output
• Outputs 1 and 2 can be set to 0 through 7.
Outputs 3 through 8 can be set only to 0 (unmuted) or 1 (muted).
•
Global audio mute
Global audio unmute
View all output mutes
Power Save Modes
Set power save mode
View power save mode
NOTE: X@
= Input number
X#
= Output number
X$
= De-embedded audio output number
X(
= Video and sync mute status
X1)
= Audio mute status
X1@
= Individual mute status
X5$
= Power save mode
12
ASCII Command
(Host to Switcher)
X@ X#
* !
1*2!
X@ X#
* %
7*5%
X@ X$
* $
6*4$
E X@ X#
+Q * % ...
X@ X1@
* B
X# X1)
* Z
X#
Z
X1)
to audio mute status :
1*Z
0*Z
E }
VM
E X5$ }
PSAV
E }
PSAV
0 – maximum number of inputs for your model (0 = untied)
1 – maximum number of outputs for your model (0 = untied)
1 or 2 (analog and S/PDIF only). If the audio output number entered
is greater than 2, an E12 error code ("Invalid output number") is returned.
0 = video and sync unmuted, 1 = video muted, 2 = video and sync muted
0 = audio unmuted, 1 = HDMI audio muted, 2 = analog audio muted,
3 = HDMI and analog audio muted, 4 = S/PDIF audio muted,
5 = HDMI and S/PDIF audio muted, 6 = analog and S/PDIF muted,
7 = HDMI, analog, and S/PDIF audio muted
0 = unmuted, 1 = video muted, 2 = audio muted, 3 = video and audio muted
0 = power save mode off (default)
1 = all functions disabled except SIS, USB, and IP ports. Fan speed slows.
2 = front panel buttons and all functions disabled except SIS, USB, and IP
Response
(Switcher to Host)
X# X@ ]
Out •In •All
]
Out2•In1•All
X# X@ ]
Out •In •Vid
]
Out5•In7•Vid
X$ X@ ]
Out •In •Aud
]
Out4•In6•Aud
X@ X# }
* !
]
Qik
X@ X1@]
Vmt *
X# X1)]
Amt *
X1)]
]
Amt1
]
Amt0
X1@ X1@ X1@ ]
1 2 n
. . .
X5$]
Psav
X5$]
Cancel by pressing any front panel button, sending an SIS command, or
opening PCS.
ports. Fan speed slows. Cancel by entering the
or opening PCS.
Additional Description
X@
Tie HDMI input to video and audio of
X#
output .
Tie input 1 output 2, video and audio.
X@
Tie HDMI video to HDMI output
Tie input 7 video to output 5.
X@
Tie HDMI audio input to audio output
X$
.
Tie input 6 audio to output 4.
X@
Tie multiple inputs to multiple
X#
outputs with one command.
Set mute of an output.
X#
Set output audio to mute status
X1)
View audio mute status for output
X#
.
Mute all audio outputs.
Unmute all audio outputs.
X1@
Each response is the mute status of
an output, starting from output 1.
n is the maximum number of outputs on
the unit.
Set the unit power save mode to
View the current power save mode.
E }
PSAV0
X#
.
X1)
.
X5$
.
command