Real-Time Query - Siemens FC18 Operating Manual

9.

REAL-TIME QUERY

FC18 fire alarm controller (interlocking) contains ten types of real-time events:
Table 3-2
Types of real-time events
Fire alarm/activation
Supervision
Disable
Trouble
Test
Walk-test
Locate
Unconfigure equipment
Unknown equipment
Inconsistent equipment
Exchange equipment
Unconfigure equipment: Equipments not on the engineering document list.
Unknown equipment: Equipments not listed by Table 1-2.
Inconsistent equipment: The type of installed equipment on site is inconsistent with engineering document.
Exchange equipment: Dirty smoke detector.
Steps:
1. Press "Menu" to browse the main menu. (Fig. 9-1)
Main menu displayed.
2. Press "↓" to select an event type to query then press "OK".
All the events meeting the requirements will be displayed in the window. Use
"↓" /"↑" to browse items.
When an event is selected, press "→" to pop out a shortcut menu (Fig. 9-2). All
operable items will be listed according to user's level. Use "↓" / "↑" to select
an operation then press "OK" to take the operation.
Note:
－ "0001": Order of an event
－ "COMM trouble": Type of an event
－ "2008-08-08 10:10:10": Date and time when an event takes place
－ "Interlocking line / 01.0005": Text message and equipment address of an
event
－ "Interlocking group": text message of the group which this interlocking
equipment belongs to. (If the equipment does not belong to any group,
only text message of the event and equipment address are displayed.)
Operating Manual of FC18 Controller
Priority
1
2
3
4
5
5
5
6
7
8
9
Event Brow Help Login
Alarm & active
Alarm & active
Trouble
System Normal
Supervision
Disable
SIEMENS Building
Test
SIEMENS
Walk-Test
Locate
<2008-08-08 08:08:08>
Fig. 9-1
Trouble
0002 COMM trouble 2008-08-08 10:10:10
Interlocking Line / 01.005
0001 Other 2008-08-08 10:10:08
Property
Property
Room 1008, Building 1 / 01.001.291
History
Disable
Test
Fig. 9-2
Page: 26/63