Indicator
Name
System Message
Indicator
Turn Signal and
Hazard Warning
Indicators
High Beam
Indicator
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
On/Blinking
Comes on for a few seconds when you
●
turn the ignition switch to ON
then goes off.
Comes on along with a beep when a
●
problem is detected. A system message
on the multi-information display
appears at the same time.
Blinks when you operate the turn signal
●
lever.
Blinks along with all turn signals if you
●
press the hazard warning button.
If you depress the brake pedal while the
●
high speed driving, both indicators and
all turn signals blink at the four times.
Comes on when the high beam
●
headlights are on.
Explanation
While the indicator is on, press the
●
*1
,
(
w
(information) button to see the
message again.
Refer to the Indicators information in
●
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
The multi-information display does not
●
return to the normal screen unless the
warning is cancelled, or the
button is pressed.
Does not blink or blinks rapidly - A
●
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs
P. 566, 567, 569
uuIndicatorsu
Message
—
—
—
—
95
Continued