Honda CR-V Owner's Manual page 504

■
Collision Alert Stages
Beep
* Not available on all models
The beeper sounds, and a CTBA warning
blinks on the multi-information display, and
hard braking is applied when a possible
collision becomes likely unavoidable.
This automatic braking with the system
activated is cancelled after the vehicle comes
to a complete stop.
Apply the brakes accordingly.
A message indicating that the system has
activated appears on the multi-information
display after the vehicle is stopped.
2 Display Warning and Information
Messages P. 108
The system may be cancelled if you operate
the brake pedal, the accelerator pedal, or the
steering wheel to avoid the collision.
uuBrakinguCity-Brake Active system
1City-Brake Active system
The system may not activate or may not detect a
vehicle in front of your vehicle under the following
conditions:
•
A vehicle in front of you is diagonally, horizontally,
or frontally positioned.
•
The distance between your vehicle and the vehicle
ahead of you is too short.
•
The speed difference between your vehicle and a
vehicle ahead of you is large.
•
A vehicle cuts in front of you, and brakes suddenly.
•
You rapidly accelerate your vehicle, getting closer
to a vehicle ahead.
•
An oncoming vehicle suddenly drifts in front of
you.
•
Your vehicle suddenly drifts into the oncoming
lane.
•
A vehicle suddenly crosses in front of you at
intersections.
•
When driving in bad weather (heavy rain, fog,
snow, etc.).
•
When driving on a curved or winding road.
•
A vehicle in front of you is extremely dirty, making
it difficult to reflect radio waves well.
•
You depress the brake pedal or turn the steering
wheel to avoid a collision.
•
A vehicle ahead of you is a motorcycle or other
small vehicle the sensor cannot detect properly.
•
The upper part of the windscreen around the laser
sensor is covered with dirt, ice frost, etc.
Continued
*
*
503