Sequential Mode - Honda CR-V Owner's Manual

Hide thumbs Also See for CR-V:
Table of Contents

Advertisement

Sequential Mode

Use the paddle shifters to change between 1st and 9th gears without removing your
hands from the steering wheel. The transmission will switch to the sequential mode
when you pull a paddle shifter while driving. This mode is useful when engine
braking is needed.
When the transmission is in
The vehicle will go into the sequential mode momentarily, and the sequential mode
gear selection indicator will come on.
Once you start travelling at a constant speed, the sequential mode will automatically
switch off, and the sequential mode gear selection indicator will go off.
Hold the
(
+ paddle shifter for a few seconds to return to normal drive.
When the transmission is in
The vehicle will go into the sequential mode, and the M (sequential mode) indicator
and sequential mode gear selection indicator will come on.
If the vehicle speed increases and the engine speed reaches near the tachometer's
red zone, the transmission automatically shifts up to next gear.
You can cancel this mode by changing the gear position to
paddle shifter for a few seconds. When the sequential mode is cancelled, the M
indicator and sequential mode gear selection indicator go off.
(
D :
(
S :
(
D , or pulling the
(
+
Continued
uuWhen DrivinguShifting
417

Advertisement

Table of Contents
loading

Table of Contents