Honda CR-V Owner's Manual page 45

uuSeat BeltsuFastening a Seat Belt
Lap belt
as low as
possible
■
Adjusting the Shoulder Anchor
The front seats have adjustable shoulder anchors to accommodate taller and shorter
occupants.
Push
Push
44
3. Position the lap part of the belt as low as
possible across your hips, then pull up on
the shoulder part of the belt so the lap part
fits snugly. This lets your strong pelvic
bones take the force of a crash and reduces
the chance of internal injuries.
4. If necessary, pull up on the belt again to
remove any slack, then check that the belt
rests across the centre of your chest and
over your shoulder. This spreads the forces
of a crash over the strongest bones in your
upper body.
1. Move the anchor up and down while
holding the release buttons.
2. Position the anchor so that the belt rests
across the centre of your chest and over
your shoulder.
1Fastening a Seat Belt
WARNING
3
Improperly positioning the seat belts can
cause serious injury or death in a crash.
Make sure all seat belts are properly
positioned before driving.
To release the belt, push the red PRESS button then
guide the belt by hand until it has retracted
completely.
When exiting the vehicle, be sure the belt is out of
the way and will not get caught by closing the door.
1Adjusting the Shoulder Anchor
The shoulder anchor height can be adjusted to four
levels. If the belt contacts your neck, lower the height
one level at a time.
After an adjustment, make sure that the shoulder
anchor position is secure.