Opening/Closing The Power Windows; Opening/Closing Windows With Auto-Open/Close Function - Honda CR-V Owner's Manual

Opening and Closing the Windows

Opening/Closing the Power Windows

The power windows can be opened and closed when the ignition switch is in ON
( w *1 , using the switches on the doors. The driver's side switches can be used to
open and close all the windows.
The power window lock button on the driver's side must be switched off (not
pushed in, indicator off) to open and close the windows from anywhere other than
the driver's seat.
When the power window lock button is switched on (pushed in, indicator on), you
can only operate the driver's window. Turn the power window lock button on if a
child is in the vehicle.
■

Opening/Closing Windows with Auto-Open/Close Function

Power Window
Lock Button
Driver's
Window
Switch
Front Passenger's
Window Switch
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
180
■
Automatic operation
On
To open: Push the switch down firmly.
Off
To close: Pull the switch up firmly.
The window opens or closes completely. To
stop the window at any time, push or pull the
Indicator switch briefly.
■
Manual operation
To open: Push the switch down lightly, and
hold it until the desired position is reached.
To close: Pull the switch up lightly, and hold it
until the desired position is reached.
1Opening/Closing the Power Windows
WARNING
3
Closing a power window on someone's
hands or fingers can cause serious injury.
Make sure your passengers are away from
the windows before closing them.
WARNING: Always take the ignition key with you
whenever you leave the vehicle alone (with other
occupants).
The power windows can be operated for up to 10
minutes after you turn the ignition switch to off
Auto-open/close function on front windows
Opening either front door cancels this function.
Auto-open/close function on all windows
Closing the driver's door cancels this function.
Auto Reverse
If a power window senses resistance when closing
automatically, it stops closing and reverse direction.
The driver's window auto reverse function is disabled
when you continuously pull up the switch.
The auto reverse function stops sensing when the
window is almost closed to ensure that it fully closes.
*1 .