Honda CR-V Owner's Manual page 618

Air Compressor Switch
ON
OFF
Air Pressure Gauge
Deflate Button
• Greater than 130 kPa (19 psi), but less than
specified pressure:
Turn the air compressor switch on to inflate
the tyre until the tyre pressure reaches
specified pressure.
2 Injecting Sealant and Air P. 613
Then drive carefully for 10 more minutes or
until you reach the nearest service station.
Do not exceed 50 mph (80 km/h).
u You should repeat this procedure as long
as the air pressure is within this range.
6. Press the pressure deflate button until the
gauge returns to 0 kPa (0 psi).
7. Repackage and properly stow the kit.
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre
1Distributing the Sealant in the Tyre
Refer to the driver's doorjamb label for the specified
pressure.
Continued
617