System - Honda CR-V Owner's Manual

* Not available on all models
You can calibrate the system from the
customized features on the multi-information
display.
1. Press button until
the display, then press the SEL/RESET
button.
u SPEED ALARM appears on the display.
2. Press button until DEFLATION WARNING
SYSTEM appears on the display.
3. Press the SEL/RESET button.
u The display switches to the
customization setup screen, where you
can select CANCEL or INITIALISE.
4. Press the button and select
INITIALISE, then press the SEL/RESET
button.
u COMPLETED screen appears, then the
display returns to the customization
menu screen.
• The calibration process finishes
automatically.
uuWhen DrivinguDeflation Warning System
1Deflation Warning System Calibration
•
Deflation Warning System cannot be calibrated if a
compact spare tyre
•
appears on The calibration process requires approximately 30
minutes of cumulative driving at speeds between
40−100 km/h (25−62 mph).
•
During this period, if the ignition is turned on and
the vehicle is not moved within 45 seconds, you
may notice the low tyre pressure indicator comes
on briefly. This is normal and indicates that the
calibration process is not yet complete.
If the snow chains are installed, remove them before
calibrating the deflation warning system.
If the low tyre pressure/deflation warning system
indicator comes on even when the properly inflated
specified regular tyres are installed, have the vehicle
checked by a dealer.
We recommend that the tyres be replaced with the
same brand, model, and size as the originals. Ask a
dealer for details.
* is installed.
485