Honda CR-V Owner's Manual page 75

Hide thumbs Also See for CR-V:

Table of Contents

uuChild SafetyuSafety of Infants and Small Children

Installing a Child Restraint System with a Lap/Shoulder Seat

1. Place the child restraint system on the

vehicle seat.

2. Route the seat belt through the child

restraint system according to the child

restraint system manufacturer's

instructions, and insert the latch plate into

Insert the latch plate fully until it clicks.

3. Push down the tab. Route the shoulder part

of the belt into the slit at the side of the

4. Grab the shoulder part of the belt near the

buckle, and pull up to remove any slack

from the lap part of the belt.

When doing this, place your weight on

child restraint system and push it into the

vehicle seat.

5. Position the belt properly and push up the

tab. Make sure the belt is not twisted.

When pushing up the tab, pull up the

upper shoulder part of the belt to

remove any slack from the belt.

1Installing a Child Restraint System with a Lap/Shoulder Seat Belt

A child restraint system that is not properly secured

will not adequately protect a child in a crash and may

cause injury to the child or other vehicle occupants.