Inspecting And Changing Fuses - Honda CR-V Owner's Manual

uuFusesuInspecting and Changing Fuses

Inspecting and Changing Fuses

Blown Fuse
Combined
Fuse
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
646
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a burned out fuse, remove it
and replace it with a new one.
*1 . Turn
( 0
1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a new one of the same specified
amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage.
2 Fuse Locations P. 639