Honda CR-V Owner's Manual page 414

■
Shift Lever Operation
Shift Lever Indicator
Home Position
Tachometer's red zone
Gear Position Indicator
M (sequential mode) Indicator
Sequential Mode Gear Selection Indicator
Press the (Park) button to change to
( P
( P .
Move the shift lever in the direction of
the arrow to change to
Slide the shift lever to the driver side
and hold it for a while to change to
is only available when the
( S
transmission is in ( D . Change the gear
position to , then move the shift
( D
lever in the direction of the arrow to
change to ( S .
The shift lever automatically returns to
Home position as you release it.
1Shift Lever Operation
NOTICE
When you change the transmission position from
to and vice versa, come to a complete stop and
( R
keep the brake pedal depressed.
Operating the shift lever before the vehicle has come
to a complete standstill can damage the transmission.
Use the gear position indicator and the shift lever
indicator to check the gear position before selecting
a gear position.
If the indicator of the currently selected gear position,
or all segment of the gear position indicator is
blinking, there is a problem with the transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
or .
( R ( D
speed limit). If this happens, you may experience a
slight jolt.
( N .
The beeper sounds once when you change to
Continued
uuWhen DrivinguShifting
( D
.
R (
413