Spare Parts; Replacing The Device Fuse - Endress+Hauser prosonic flow 92 Operating Instructions Manual

Prosonic Flow 92
!
Endress+Hauser
9.5

Spare parts

Section 9.1 contains a detailed trouble-shooting guide. The measuring device, moreo-
ver, provides additional support in the form of continuous self-diagnosis and error mes-
sages. Trouble-shooting can entail replacing defective components with tested spare
parts. The illustrations below show the available scope of spare parts.
Note!
You can order spare parts directly from your E+H service organisation by providing the
serial number printed on the nameplates (see Page 9).
Spare parts are shipped as sets comprising the following parts:
• Spare part
• Additional parts, small items (threaded fasteners, etc.)
• Mounting instructions
• Packaging
Transmitter spare parts
Fig. 37: Spare parts for Prosonic Flow 92 transmitter
1 Power adapter
2 Battery pack
3 Carrying strap
The Prosonic Flow 92 transmitter is also available as a replacement device.
Please contact your nearest E+H service organisation.
9.6

Replacing the device fuse

Please contact your local E+H representative if the device fuse is defective.
9 Trouble-shooting
53