Group System - Endress+Hauser prosonic flow 92 Operating Instructions Manual

11 Description of device functions
90
11.7.1

Group SYSTEM

System
System
Please refer to Section 9 "Trouble-shooting" on Page 49 for further information and remedial measures.
Communication
Amplifier Fault
Amplifier Data
Received Signal
Init. Run
Signal Low
Signal High
Error Current Output
Backup Battery Fail
Þ
Fault Message
Þ
Signal Check
Þ
Simulation Current
Þ
SW-Rev. Amplifier
System
Fault Message
You will find the message "Communication", as displayed on the screen, on
Page 50.
You will find the message "Amplifier Fault", as displayed on the screen, on
Page 50.
You will find the message "Amplifier Data", as displayed on the screen, on
Page 50.
You will find the message "Received Signal", as displayed on the screen, on
Page 50.
You will find the message "Init. Run", as displayed on the screen, on
Page 50.
You will find the message "Signal Low", as displayed on the screen, on
Page 50.
You will find the message "Signal High", as displayed on the screen, on
Page 50.
You will find the message "Error Current Output", as displayed on the screen,
on Page 50.
You will find the message "Backup Battery Fail", as displayed on the screen,
on Page 50.
Prosonic Flow 92
Þ
Function
Þ
Function
Þ
Function
Þ
Function
Endress+Hauser