Table of Contents
Advertisement
Liquiphant M/S (HT), FEL 50 A PROFIBUS PA
!
"
Endress+Hauser
9.2
Spare parts
For spare parts KA ... (Basic device) table "Supplementary documentation" page 39.
Note!
You can order spare parts directly from your E+H service organisation using the serial
number which is printed on the transmitter nameplate (see page 6). The corresponding
spare part number is found on every spare part. Installation instructions are printed on
the enclosed package insert.
If the device designation changes, you must order a changed nameplate. You must then
transfer the data for the new device to the changed nameplate and then fix the plate to
the housing of the Liquiphant. See information in package insert.
Caution!
• It is not possible to convert a standard device into an Ex-system by replacing parts.
• When repairing certified device, keep to the appropriate regulations.
• With FM approved devices, it is forbidden to make changes to the device which are
not expressly approved in the operating instructions. A violation of this ban may make
the approval for operating this device null and void.
9.3
Return
See KA ... (Basic device) table "Supplementary documentation" page 39.
9 Troubleshooting
35
Advertisement
Table of Contents
