TS-300 Profile Engine
The Profile Engine will show the Info screen at start-up !
Press the Home button (B) to switch between the Info screen and the current menu mode.
Press the Return button (C) to go back to the main menu.
Activate Focus Mode
Press and hold down the Home button (B) for 2 sec. The output will be open white 3200K(Focus mode).
The device automatically returns to normal mode after 3 min. or when the Home button is pressed again.
Main Menu Options
DMX Configuration
DMX Address
Manual mode
Dimmer curves
Dimmer speed
DMX Lost mode
Fan mode
PWM Frequency
Calibration
Display
Info
Reset factory settings
1. DMX Configuration
In this menu you can choose a DMX configuration.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 3 channel modes
04) Press the ENTER button to confirm.
Ordercode: 200001
20
.
,
or
.